Cart

Showing 1–12 of 285 results

screw sdzself drilling drywall screw
Sale

Daggerz Self Drilling Drywall Screw Zinc Coating #10 x 3-1/2″ (1,500/box)

0 out of 5
0 review(s)
$150.00 $135.00
This self drilling drywall screw is made for attaching drywall or sheathing to metal studs, 20 gauge or heavier. These screws have a bugle head which sits flush with your drywall when installed. The head accepts a #2 Phillips bit...
screw sdzself drilling drywall screw
Sale

Daggerz Self Drilling Drywall Screw Zinc Coating #10 x 4″ (1,000/box)

0 out of 5
0 review(s)
$120.00 $105.00
This self drilling drywall screw is made for attaching drywall or sheathing to metal studs, 20 gauge or heavier. These screws have a bugle head which sits flush with your drywall when installed. The head accepts a #2 Phillips bit...

Grip Rite 12BX Bright Smooth Shank Box Nail 3-1/4″ (50lb. Box)

0 out of 5
0 review(s)
$59.00
Thinner shank than common nail. Flat head. Diamond point. For general construction, carpentry, and framing.
2MSCAP25BX2MSCAP25BX
Sale

Grip-Cap 12ga x 1″ Metal Square Cap Nail Ring Shank 2MSCAP (25lb. Box)

0 out of 5
0 review(s)
$59.00 $50.00
Grip-Cap 12ga x 1″ Metal Square Cap Nail Ring Shank 2MSCAP (25lb. Box) For applying roofing asphalt shingles, insulation board, and felt-to-wood substrates. Large head and heavier shank gauge provide greater holding power.
30HGRSPOBK30HGRSPOBK
Sale

Grip-Rite #7 x 4-1/2 in. 30-Penny Hot-Galvanized Ring Shank Pole Barn Nails (30lb Bucket)

0 out of 5
0 review(s)
$89.00 $59.00
Grip-Rite #7 x 4-1/2 in. 30-Penny Hot-Galvanized Ring Shank Pole Barn Nails (30lb Bucket)   Part Number: 30HGRSPO
JHPG11210SJHPG11210S
Sale

Grip-Rite 10.25ga x 1.5″ Coated Barbed Joist Hanger Nails Primeguard Plus (215 Count)

0 out of 5
0 review(s)
$24.50 $17.50
Grip-Rite 10.25ga x 1.5″ Coated Barbed Joist Hanger Nails Primeguard Plus (215 Count)   Part Number:  JHPG11210S
134EGFS1134EGFS1
Sale

Grip-Rite 134EGFS1 1-3/4″ Electrogalvanized Fence Staple (1lb box)

0 out of 5
0 review(s)
$5.00 $3.50
Grip-Rite 134EGFS1 1-3/4″ Electrogalvanized Fence Staple (1lb box) Side points allow staples to tack easily and drive straight Ideal for attaching wire fence or barbed wire to wooden posts 1-3/4″ (4.45 cm) 1 Pound
212HGFS212HGFS
Sale

Grip-Rite 2-1/2″ x 6ga Hot Galvanized Fence Staple (50 lb. Box)

0 out of 5
0 review(s)
$59.00 $35.00
Grip-Rite 2-1/2″ x 6ga Hot Galvanized Fence Staple (50 lb. Box) 50 Lb. Staple – Fence and poultry staples. Hot galvanized. Compatible for the new treated lumber requirements. – Length: 2-1/2″, Gauge: 6 ga, Material: Steel, Finish: Hot Galvanized, Size:...
GRS8DRRHGRS8DRRH
Sale

Grip-Rite 2-3/8″ x .113″ 28-degree Wire Weld Offset Round Head Nails, Bright Coated (2,500 Pcs./Box)

0 out of 5
0 review(s)
$39.00 $27.50
Grip-Rite 2-3/8″ x .113″ 28-degree Wire Weld Offset Round Head Nails, Bright Coated (2,500 Pcs./Box) For use with most 28-degree wire weld framing nailers. Part #: GRS8DRRH
GRSP8DHGRSP8DH
Sale

Grip-Rite 2-3/8″ x .113″ 30-degree Paper Tape Offset Round Head Nails Bright Coated (2,500 Pcs./Box)

0 out of 5
0 review(s)
$30.00 $20.00
Grip-Rite 2-3/8″ x .113″ 30-degree Paper Tape Offset Round Head Nails Bright Coated (2,500 Pcs./Box)ox) For use with most 30-degree wire weld framing nailers. Part #: GRSP8DH
GRSP8DHGRSP8DH
Sale

Grip-Rite 2-3/8″ x .114″ 30-degree Paper Tape Offset Round Head Nails Hot Dipped Galvanized (2,500 Pcs./Box)

0 out of 5
0 review(s)
$49.00 $35.00
Grip-Rite 2-3/8″ x .114″ 30-degree Paper Tape Offset Round Head Nails Hot Dipped Galvanized (2,500 Pcs./Box) For use with most 30-degree wire weld framing nailers. Part #: GRSP8DRHGH
16CUTFLR16CUTFLR
Sale

Grip-Rite 3-1/2″ x 16d Cut Flooring Nails Tempered Hardened Steel (50 lb. Box)

0 out of 5
0 review(s)
$79.00 $59.00
Grip-Rite 3-1/2″ x 16d Cut Flooring Nails Tempered Hardened Steel (50 lb. Box) For securing hardwood strip flooring to subfloor and to secure wood framing or furring strips to brick, block, or concrete. Wide side of the nail should always...
Loading...