Cart

Simpson Connectors for Cold Formed Steel Construction

Showing 1–12 of 105 results

Simpson DBC2.5 Drywall Stud Bridging Connector 20ga (200/bucket)

0 out of 5
0 review(s)
$113.85
Patented design allows for one- or two-screw installation of the DBC, significantly reducing labor and material cost. The first and only connector load rated for 3/4" u-channel, the DBC joins the SUBH line of bridging connectors tested as a system,...

Simpson DBR/30 Drywall Spacer Bracer 22ga (20/box)

0 out of 5
0 review(s)
$69.00
Simpson Strong-Tie introduces the SBR and DBR spacer bracers for cold-formed steel construction. These spacer bracers reduce the installed cost of cold-formed steel stud walls by enabling faster stud layout while minimizing the need for bridging clips.

Simpson DBR/33 Drywall Spacer Bracer 20ga (20/box)

0 out of 5
0 review(s)
$74.75
Simpson Strong-Tie introduces the SBR and DBR spacer bracers for cold-formed steel construction. These spacer bracers reduce the installed cost of cold-formed steel stud walls by enabling faster stud layout while minimizing the need for bridging clips.

Simpson DSSCB43.5-KT25 Drift Strut Bypass 4″ x 3.5″ Slide Clip w/ Screws (25/box)

0 out of 5
0 review(s)
$211.60
Simpson Strong-Tie introduces the DSSCB for cold-formed steel construction. The DSSCB is used to anchor cold-formed steel bypass framing to the edge of a floor slab in order to accommodate horizontal building drift. The DSSCB simplifies panelized construction by allowing...

Simpson DSSCB46-KT25 Drift Strut Bypass 4″ x 6″ Slide Clip w/ Screws (25/box)

0 out of 5
0 review(s)
$201.25
Simpson Strong-Tie introduces the DSSCB for cold-formed steel construction. The DSSCB is used to anchor cold-formed steel bypass framing to the edge of a floor slab in order to accommodate horizontal building drift. The DSSCB simplifies panelized construction by allowing...

Simpson DSSCB48-KT25 Drift Strut Bypass 4″ x 8″ Slide Clip w/ Screws (25/box)

0 out of 5
0 review(s)
$224.25
Simpson Strong-Tie introduces the DSSCB for cold-formed steel construction. The DSSCB is used to anchor cold-formed steel bypass framing to the edge of a floor slab in order to accommodate horizontal building drift. The DSSCB simplifies panelized construction by allowing...

Simpson DTC 2.5″ X 1-7/8″ X 2.75″ Roof Truss Head of Wall Slide Clip (100/box)

0 out of 5
0 review(s)
$154.10
The Simpson Strong-Tie DTC Double Slotted Roof Truss Clips are used for alignment control between a roof truss and non bearing walls.

Simpson DTT1Z Deck Tension Tie ZMAX for Cold Formed Steel

0 out of 5
0 review(s)
$2.88
Simpson DTT1Z Deck Tension Tie ZMAX for Cold Formed Steel The HTT is a single-piece formed tension tie — no rivets, and a 4-ply formed seat. No washers are required. S/DTT2Z tension tie is suitable for lighter-duty hold-down applications on...

Simpson FC32-5/97-R25 By-Pass Framing Fixed Clip 2″ x 3.5″ x 5″ 12ga (25/box)

0 out of 5
0 review(s)
$74.75
Ideal for high-seismic areas, Simpson Strong-Tie® FC connectors are the optimal solution for fixed-clip bypass framing. FC clips are often welded to the structure in high-seismic zones, but they also feature anchorage holes so that concrete screws or powder-actuated fasteners...

Simpson FC62-5/118-R25 By-Pass Framing Fixed Clip 2″ x 6″ x 5″ 10ga (25/box)

0 out of 5
0 review(s)
$136.85
Ideal for high-seismic areas, Simpson Strong-Tie® FC connectors are the optimal solution for fixed-clip bypass framing. FC clips are often welded to the structure in high-seismic zones, but they also feature anchorage holes so that concrete screws or powder-actuated fasteners...

Simpson FC62-5/97-R25 By-Pass Framing Fixed Clip 2″ x 6″ x 5″ 12ga (25/box)

0 out of 5
0 review(s)
$97.75
Ideal for high-seismic areas, Simpson Strong-Tie® FC connectors are the optimal solution for fixed-clip bypass framing. FC clips are often welded to the structure in high-seismic zones, but they also feature anchorage holes so that concrete screws or powder-actuated fasteners...

Simpson FC82-5/118-R25 By-Pass Framing Fixed Clip 2″ x 8″ x 5″ 10ga (25/box)

0 out of 5
0 review(s)
$182.85
Ideal for high-seismic areas, Simpson Strong-Tie® FC connectors are the optimal solution for fixed-clip bypass framing. FC clips are often welded to the structure in high-seismic zones, but they also feature anchorage holes so that concrete screws or powder-actuated fasteners...
Loading...