Freud 1-3/8″ (Dia.) Raised Panel “V” Joint Bit with 1/2″ Shank #99-038
$99.99
This raised panel “V” joint bit from Freud Tools is an essential addition for woodworkers aiming to create strong, aesthetically pleasing joints for glued-up raised panels. Designed for use on table-mounted routers, it easily cuts through hardwoods, softwoods, and various composites, including veneered plywood, to deliver precise results every time. The innovative design allows for effortless adjustments; users can simply raise or lower the bit by 3/32″ to route the mating edge without needing to center the bit in the wood. With Freud’s Perma-SHIELD® coating providing added durability, this bit is not just a tool but a partner in achieving attractive glue joint raised panels with efficiency and craftsmanship.
Description
These bits are specially designed to make glue joints for raised panels. Thanks to the interlocking “V” Joints, the mating surfaces are at an angle to the finished surface of the panel, not vertical, so the dark lines like those created by standard finger joint bits are not visible. Use to rout hardwood, softwood or composites in table-mounted routers. Bit does not have to be precisely centered in the work piece. Simply adjust the bit height 3/32″ after routing the first piece, and then rout the mating piece.
Additional information
| Weight | 0.4 lbs |
|---|---|
| Dimensions | 3 × 2.2 × 5.5 in |
| Overall Diameter | 1-3/8 in |
| Minor Height | 3/16 in |
