The LDT anchor is a high performance anchor that cuts its own threads into concrete. Anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors shall have a finished hex washer head with anti-rotation serrations to prevent anchor back-out. The head of the anchor is stamped with a length identification code for easy inspection. The anchor shall be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994.

• Superior performance to wedge anchor.
• Installs in less than half the time of wedge anchors or adhesive anchors.
• Simply drill a pilot hole and drive the LDT anchor by hand or impact.
• No torching or grinding required to remove anchor.
• Use standard ANSI bits instead of proprietary bits.
• Single piece design, no nut and washer to assemble.
• No special proprietary bits to purchase or lose.
• Reduce chances for anchor failure due to incorrect bit usage.

• Selection and Order Information
• Performance Data
• Approvals and Listing
• ITW Red Head Capabilities Brochure
• Submittal Package