16IN TENSION TIE
$31.67
The HTT is a single-piece formed tension tie — no rivets, and a 4-ply formed seat. No washers are required.
S/DTT2Z tension tie is suitable for lighter-duty hold-down applications on single or back-to-back studs, and installed easily with #14 self-drilling screws.
The HTT, S/DTT and S/LTT tension ties are ideal for retrofit or new construction projects. They provide high-strength, post-pour, concrete-to-steel connections.
Material
- HTT — 111 mil (11 ga.); DTT1Z, S/DTT2Z — 68 mil (14 ga.); S/LTT20B — strap: 97 mil (12 ga.), plate: 229 mil (3 ga.)
Finish
- HTT, S/LTT — galvanized; DTT1Z, S/DTT2Z — ZMAX® coating
Installation
- Use all specified fasteners.
- Use the specified number of type of screws to attach the strap portion to the steel stud. Bolt the base to the wall or foundation with a suitable anchor; see table for the required bolt diameter.
- S/DTT2Z requires a standard-cut washer (included) be installed between the nut and the seat.
- Do not install S/LTT20B raised off of the bottom track.
- See SB and SSTB anchor bolts for anchorage options.
- See SET-XP® and AT-XP® adhesive products for anchor bolt retrofit options.
Additional information
| Weight | 2.17 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
| Manufacturer | |
| Model (SKU) | |
| Full Case Quantity | 10 |
| Quantity |
